Glove Port (Single port) is a manual retractor mainly used in laparoscopic surgery. Glove Port holds back the edges of the incisions to insert the operative instruments and the endoscope into the body through cook caps.
♦ Glove port A simple characteristics
1) Able to open during operation
2) Robotic surgery
3) Separation of wound retractor and port
4) Easy insert ring design
5) 3mm port~ 15mm port
6) Separation of gas inlet and outlet
♦ Advantages
1) Only 2~2.5cm incision is required.
-> Glove Port hardly remains scar.
2) Glove Port is applicable to all kinds of patients.
-> Glove Port is capable to adjust the height according to the thicknesses of the patients' abdominal walls, as sheet is able to be folded down by outer ring.
3) Wound Retractor is made of polyurethane.
-> Since Polyurethane is more sturdy and softer than silicone which is used in the previous products, Glove Port is not torn easily. In addition, the direction control is flexible so that curved instruments get inserted.
4) Easy to inject and emit CO2 gas.
->Glove Port has the gas inlet and outlet separately.
5) High-elastic Port Cap
->It lets 3~12mm instruments, endoscope and even Endo GIA inserted into Glove Port.
6) Convenient removal
->with removal line and removal ring, Glove Port can be easily removed after the surgery.
♦ How to use
1) Make a 2.5 cm incision on the navel area.
2) Squeeze the inner ring.
3) Insert the inner ring into the incision.
4) Adjust the outer ring to install the inner ring inside the abdominal wall.
5) Roll up the Urethane wound retractor and fix the outer ring according to abdomen thickness
6) Connect the valve connector to the ventilation valve and inject CO2 gas.
7) Insert surgical instruments and endoscope through port cap.
8) Remove the Glove Port by pulling the removal ring.